The TIP M14 core-bit is used to drill into hard tile & stone surfaces.

1. Select the right size core-bit for your project.
2. Mount the core bit onto your power-tool. M14 core bits are designed to fit onto an angle grinder / drill adapter with an M14 thread. Make sure the bit is securely attached to the power-tool before beginning.
3. Mark the desired hole position.
4. Begin drilling at a 30-degree angle to the surface. Slowly raise to 90-degree. Apply steady pressure and continue drilling until the desired depth is reached.
5. Remove the core bit from the hole periodically to clear out debris and allow for cooling.
6. Once the hole is complete, remove the core bit from the power-tool and clean it thoroughly. Store the bit in a dry, cool place until its next use.
7. Take proper safety precautions when using a M14 core bit. Wear eye protection and gloves, and make sure you are working in a well-ventilated area.