diamond core bits

TIP Vacuum-Brazed Diamond Core Bits

BRUTALLY DURABLE

  • M14 Angle-Grinder Thread
  • 10mm Diamond Tip Height
  • 8mm-110mm Diameter Sizes

The diamond core cuts faster, smoother and lasts longer than any other core drills.

Superior performance, longevity and durability.

TIP vacuum-brazed diamond core bits are used by professional contractors for their uncompromising performance and ability

User Guide

Plumbers, tilers, electricians, stone masons and glass tradesman.

The bits are designed and engineered to ensure straightforward and trouble-free high-speed drilling, providing pristine chip-free holes in –

  • Porcelain
  • Ceramic
  • Marble
  • Granite
  • Glass
  • Slate
User Guide

VACUUM BRAZED DIAMOND CORE BITS

M14 angle grinder fit

Vacuum brazed, diamond core bits

No pilot bit necessary. Use a low rpm rotary drill with a planetary gearbox. Do not use hammer setting.
  1. Fasten core bit to the chuck.
  2. Apply 45° angle whilst bit rotates on the border outline.
  3. Slowly motion the drill from 45° to 90° whilst bit is rotating until finished.

Important:

  • Slowest speed
  • Minimum pressure
  • Coolant
All diamond core bits should always be used with water as a lubricant and coolant. Being hollow, allows the water to flow up inside and around the inner core of these bits during drilling, helping to keep the core bit cool and removing debris.

The diamond core bits tool life will depend on many factors: speed, lubricant, pressure and the density of the material drilled. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles.

To gain maximum life from your drill bit and to prevent your material from cracking ensure you use little to no pressure, keep the speed on the slowest setting of your drill and always keep your material and drill bit cool with plenty of water.