Quick, clean, holes.
The diamond core cuts faster, smoother and lasts longer than any other core drills.
Superior performance, longevity and durability.
TIP vacuum-brazed diamond core bits are used by professional contractors for their uncompromising performance and ability.
The bits are designed and engineered to ensure straightforward and trouble-free high-speed drilling, providing pristine chip-free holes.
The TIP M14 core-bit is used to drill into hard tile & stone surfaces.
1. Select the right size core-bit for your project.
2. Mount the core bit onto your power-tool. M14 core bits are designed to fit onto an angle grinder / drill adapter with an M14 thread. Make sure the bit is securely attached to the power-tool before beginning.
3. Mark the desired hole position.
4. Begin drilling at a 30-degree angle to the surface. Slowly raise to 90-degree. Apply steady pressure and continue drilling until the desired depth is reached.
5. Remove the core bit from the hole periodically to clear out debris and allow for cooling.
6. Once the hole is complete, remove the core bit from the power-tool and clean it thoroughly. Store the bit in a dry, cool place until its next use.
7. Take proper safety precautions when using a M14 core bit. Wear eye protection and gloves, and make sure you are working in a well-ventilated area.
6 mm
M14VBDC6
0606110038294
DRY AND WET
8 mm
M14VBDC8
0606110038300
DRY AND WET
10 mm
M14VBDC10
0606110038317
DRY AND WET
12 mm
M14VBDC12
0606110038324
DRY AND WET
16 mm
M14VBDC16
0606110038355
DRY AND WET
20 mm
M14VBDC20
0606110038379
DRY AND WET
22 mm
M14VBDC22
0606110038386
DRY AND WET
25 mm
M14VBDC25
0606110038393
DRY AND WET
32 mm
M14VBDC32
0606110038423
DRY AND WET
35 mm
M14VBDC35
060611003830
DRY AND WET
40 mm
M14VBDC40
0606110038447
DRY AND WET
50 mm
M14VBDC50
0606110038478
DRY AND WET
68 mm
M14VBDC68
0606110038515
DRY AND WET
80 mm
M14VBDC80
0606110038553
DRY AND WET
90 mm
M14VBDC90
0606110038577
DRY AND WET
100 mm
M14VBDC100
0606110038584
DRY AND WET
110 mm
M14VBDC110
0606110038607
DRY AND WET
Hexagonal shank drill adapter for M14 diamond core bits.
All diamond core bits should preferably be used with water as a lubricant and coolant. Being hollow, allows the water to flow up inside and around the inner core of these bits during drilling, helping to keep the core bit cool and removing debris.
The diamond core bits tool life will depend on many factors: speed, lubricant, pressure and the density of the material drilled. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard porcelain tiles.
To gain maximum life from your drill bit and to prevent your material from cracking ensure you use little to no pressure, and keep your material and core bit cool with plenty of water.